Stick1 for architectural lighting
Moderators: simonB, RichterMC, florent, dylan
Stick1 for architectural lighting
Hi, I am programming a stick1 using ESA Pro. I cannot see how it is possible to simply turn on a light and then turn it off again using a pushbutton switch connected to a port (like a traditional light switch) The light turns on but there seems no way to turn it off without switching another scene. Do I have to provide a separate switch to turn off? Also is it possible to have a dimmer function when a switch is held - eg. To dim up or down and hold the setting.
Re: Stick1 for architectural lighting
Hi. Using a standard push button connected to one port will not allow you to create an on/off switch . You need to make a relay which will trigger a different port every second press, or a different port if the switch is ON or OFF.
Another option would be to wire the switch to your lighting driver
Another option would be to wire the switch to your lighting driver
Simon
--
Sales/Support
--
Sales/Support