Hi,
I Select fixtures
Drag them to EasyTime window and Compress Them
Apply Curve effect with phasing 1 and set appropriate settings.
Press OK and everything works as expected, the fixtures light up sequentially.
Now i want to reverse the animation when the existing one finishes. So I though copy the ths bloc i just created, paste on timeline and reverse it, but.....
phasing gets ignored on a pasted block! Fixtures light up at the same time. tweaking the phasing in curves does not help.
Then I delete the pasted block and drag a new curve effect next to existing one. Same result. Phasing does not work!
I have recorded a demonstration screen capture:
http://www.youtube.com/watch?v=oxvItbSr93g&hd=1
What am I doing wrong?
Thank you.
Curve phasing problem on Copy/Paste (Easy Time)
Moderators: simonB, nick, RichterMC, florent, dylan, Ben
Re: Curve phasing problem on Copy/Paste (Easy Time)
I try to reproduce this here, but had no luck.
Could you send me your show file to Gernot.Schoofs[äät]t-online.de
Then I will try again with your setup.
Best
Gernot
Could you send me your show file to Gernot.Schoofs[äät]t-online.de
Then I will try again with your setup.
Best
Gernot
Re: Curve phasing problem on Copy/Paste (Easy Time)
I think that this was fixed in an earlier beta. If you have the same problem with the latest version, send over your show and I'll take a look
Simon
--
Sales/Support
--
Sales/Support
Re: Curve phasing problem on Copy/Paste (Easy Time)
I have downloaded the software directly from the website homepage (http://www.nicolaudie.com/downloads/fil ... suite2.exe)
this is my project file. I did the same with a brand new project and got the same result.
http://ge.tt/8eawOkf/v/0
this is my project file. I did the same with a brand new project and got the same result.
http://ge.tt/8eawOkf/v/0
Re: Curve phasing problem on Copy/Paste (Easy Time)
I found out :
If the fixtures are selected during copy/pasting the Phasing will be copied, if the fixtures are not selected when copy/pasting the Phasing will not be included.
Best
Gernot
If the fixtures are selected during copy/pasting the Phasing will be copied, if the fixtures are not selected when copy/pasting the Phasing will not be included.
Best
Gernot
<SOLVED> Re: Curve phasing problem on Copy/Paste (Easy Time)
Thank you, RichterMC, selection solved the problem!
Re: Curve phasing problem on Copy/Paste (Easy Time)
Thanks for reporting this, we'll get it fixed very soon
Simon
--
Sales/Support
--
Sales/Support