Manual control of individual channels?
Moderators: simonB, nick, florent, Ben
Manual control of individual channels?
Is there a way to manually control individual channels from the DE-3? In other words; A way to change the values of an individual DMX address from the STICK interface? For instance: I would like to be able to change the color of one instrument in a scene without affecting the others.
Re: Manual control of individual channels?
This is not possible in stand alone mode unless you put each channel into a different area (however there are a maximum of 10 areas)
Simon
--
Sales/Support
--
Sales/Support
Re: Manual control of individual channels?
Thank you simonB. Since I posted that topic question I have created a different area for each of 5 RGBW instruments. The problem I am experiencing now is that I cannot take manual color control in any of the areas created. I can use the dimmer, speed, and scene buttons on each area but not the palate. All of the manual controls (including the palate) work in the "Global" area but I cannot change the colors in any other area. (i.e. individual instruments).
All firmware is up to date and I have reloaded the Show file several times.
Thank you again.
All firmware is up to date and I have reloaded the Show file several times.
Thank you again.
Re: Manual control of individual channels?
Hi there, send me your show file and I'll take a look.
Simon
--
Sales/Support
--
Sales/Support