SORRY, but I need urgently your help!
I want to realize a standard DMX (PAR) Controller with sunlite. But I can't find a solution for Masterfader.
For example:
6xPar64 (Channel 1-6)
Scenes created for Chan 2-5
For Chan 1 and 6 I created Background Light. This 2 Channels are Dimmer Channels...
1) How can I creat a Master Fader Channel for all Channels 1-6. The original Scenes must not be influences!!
The reason is, that I have not on all place enough power at hand (fuse sometimes 32A but also 16A or 10Ampere).
With this Master Fader I can regulate the total power!
2) But I have also Moving Heads. This Moving Heads should not influenced from the Masterfader.
Is there a chance? I haven't find a solution, although I read the manuel....
Thank you so much for your help friends!!!!
Masterfader
Moderators: simonB, RichterMC, florent, dylan
Re: Masterfader
I'm a little confused as to what you want to do here. Do you want a master fader which doesn't effect fixtures 1 and 6? Or do you intend to create a series of switches which you don't want a master fader to effect? You can create a master switch and assign a dimmer fader to all channels but set the switch to Lowest Takes Priority. This will accept only the lowest value between the master fader and any other switches which effect a particular channel.1) How can I creat a Master Fader Channel for all Channels 1-6. The original Scenes must not be influences!!
Don't assign a master fader to the moving head dimmer channels.But I have also Moving Heads. This Moving Heads should not influenced from the Masterfader.
If you can send me your show to [email protected] and explain more clearly what you want to accomplish, I'll take a look.
Simon
--
Sales/Support
--
Sales/Support
-
- Junior Forumor
- Posts: 17
- Joined: Thu Mar 12, 2009 9:05 am
Re: Masterfader
Dear Simon!
Thank you so much for your quick answer!
Sorry for my bad illustration. It's really Simple for me, but it is not simple to explain.
Please imagine a simple DMX Controller (e.g. http://www.thomann.de/de/behringer_lc24 ... chpult.htm ). The last controller is always the master fader. The master fader control at last the light output from all channels.
And this is it. For Channel 1 to 6 (show runs...). The only request is to dim all Channel in % from the actual output.
e.g.: Snapshot: Masterfader=100%
Channel 1 is fix full power
Channel 2 is 50% from full power at this moment
And now: Masterfader to 50%
Target:
Channel 1 full power - Masterfader 50%: Output 50% from full power
Channel 2 dim 50% - Masterfader 50% : Output 25% from full power
I hope you understand my request.
I'm still waiting for your answer. Thank you so much!!!!!!!!!!!!!!!
LG. musicandmore
Thank you so much for your quick answer!
Sorry for my bad illustration. It's really Simple for me, but it is not simple to explain.
Please imagine a simple DMX Controller (e.g. http://www.thomann.de/de/behringer_lc24 ... chpult.htm ). The last controller is always the master fader. The master fader control at last the light output from all channels.
And this is it. For Channel 1 to 6 (show runs...). The only request is to dim all Channel in % from the actual output.
e.g.: Snapshot: Masterfader=100%
Channel 1 is fix full power
Channel 2 is 50% from full power at this moment
And now: Masterfader to 50%
Target:
Channel 1 full power - Masterfader 50%: Output 50% from full power
Channel 2 dim 50% - Masterfader 50% : Output 25% from full power
I hope you understand my request.
I'm still waiting for your answer. Thank you so much!!!!!!!!!!!!!!!
LG. musicandmore
-
- Junior Forumor
- Posts: 17
- Joined: Thu Mar 12, 2009 9:05 am
Re: Masterfader
Dear Simon!!!
I'm so happy!
After I checked all the values again, I found the solution.
Please delete the POST.
But for all that - THANK YOU SO MUCH FOR YOUR HELP!!!!!
Best regards,
musicandmore
I'm so happy!
After I checked all the values again, I found the solution.
Please delete the POST.
But for all that - THANK YOU SO MUCH FOR YOUR HELP!!!!!
Best regards,
musicandmore