Hi Simon.
I have been having intermittent problems with my STICK-KU1 for a while now.
More recently at a venue my moving heads would only show the colour white.
I set all my lighting up at home and reprogrammed everything from scratch.
Last night everything was fine - today i have no output whatsoever from the STICK -I did nothing inbetween times.
I am not sure what to do next. Even if I open up a new blank show (ESA Pro), I am still getting no output.
Andy
No output.
Moderators: simonB, nick, florent, dylan, Ben
Re: No output.
Hi Andy
Is your STICK detected from ESAPro?
Open the Hardware Configuration - Tools, move the faders. Does this work?
Is your STICK detected from ESAPro?
Open the Hardware Configuration - Tools, move the faders. Does this work?
Simon
--
Sales/Support
--
Sales/Support
-
- Junior Forumor
- Posts: 44
- Joined: Wed Dec 09, 2009 7:05 pm
Re: No output.
Hi Simon.
Yes, it is.
I believe it could well be the dmx chips. i have ordered some spares from RS which will be here tomorrow.
Andy
EDIT:-
New DMX chips fitted - no difference.
STICK seems to power up correctly and is identified by ESA Pro on PC.
Attempting to program a single light fixture with no success.
Andy
EDIT no. 2.........
I think i have now found the problem - a bad wiring connection on the DMX output.!!
Andy
Yes, it is.
I believe it could well be the dmx chips. i have ordered some spares from RS which will be here tomorrow.
Andy
EDIT:-
New DMX chips fitted - no difference.
STICK seems to power up correctly and is identified by ESA Pro on PC.
Attempting to program a single light fixture with no success.
Andy
EDIT no. 2.........
I think i have now found the problem - a bad wiring connection on the DMX output.!!
Andy