Martin Exterior 400 Range Programming
Moderators: simonB, nick, TomHat, florent, Ben
-
- Posts: 3
- Joined: Thu Mar 26, 2015 5:59 pm
Martin Exterior 400 Range Programming
I am having a difficult time programming my show onto my Stick KE-1. I have 28 Martin Exterior 410 fixtures on the exterior of my building and they are addressed into mode 4 which is HSIC. I have both ESA Pro and ESA 2. Any help would be appreciated. I need help programming and syncing with the stick. Thanks.
Re: Martin Exterior 400 Range Programming
Hi Daniel,
To help with your problem please can I ask exactly what difficultly you are having programming the stick, could you explain a little further?
Have you managed to have a look at the online user manual and video tutorials, they might help? (Links below)
http://manuals.nicolaudie.com/en/online ... Sb9Aj6.htm
http://www.nicolaudie.com/nicolaudietv/
Kind Regards,
Ben
To help with your problem please can I ask exactly what difficultly you are having programming the stick, could you explain a little further?
Have you managed to have a look at the online user manual and video tutorials, they might help? (Links below)
http://manuals.nicolaudie.com/en/online ... Sb9Aj6.htm
http://www.nicolaudie.com/nicolaudietv/
Kind Regards,
Ben
Benno
--
Product Support
--
Product Support
-
- Posts: 3
- Joined: Thu Mar 26, 2015 5:59 pm
Re: Martin Exterior 400 Range Programming
I have looked at all of the user manuals and tutorials online. In the ESA Pro software the one parameter that I can seem to program is the Hue. I am unable to change any of the other parameters.
Re: Martin Exterior 400 Range Programming
Hi Daniel,
Would it be possible to send me your show file plus any SSL profiles you may have created?
We can then take a look to see if we have the same problem.
Kind regards,
Ben
Would it be possible to send me your show file plus any SSL profiles you may have created?
We can then take a look to see if we have the same problem.
Kind regards,
Ben
Benno
--
Product Support
--
Product Support