Hello!
I’m programming 8 moving heads in the software and I’m making a timecode show for permanent installation. I have created some cues and programmed it all in easy show, everything seems fine but one of my 8 fixtures is triggering a little early than it should according to the cue... I made the cues again and again, all lights and cues going well but one light is still coming a little early in one particular cue! I looked at the fixtures in the software and I noticed there is “a” written on it... can anybody tell me what does that mean ?
I have attached the screenshot of that.
Thanks
Programming error!
Moderators: simonB, nick, RichterMC, florent, dylan, Ben
Programming error!
- Attachments
-
- 9DE0502D-B0EA-4A94-B9DC-CD7E80B4DCC6.jpeg (127.61 KiB) Viewed 3163 times
Re: Programming error!
Hi VSDShawan,
This is simply a keyboard shortcut. If you press "a", you will activate fixture #8 pan/tilt.
You can delete the shortcut by
1) clicking on the icon to select it then
2) press <ctrl>+<Del> on your computer keyboard
Best regards,
Pperpot
This is simply a keyboard shortcut. If you press "a", you will activate fixture #8 pan/tilt.
You can delete the shortcut by
1) clicking on the icon to select it then
2) press <ctrl>+<Del> on your computer keyboard
Best regards,
Pperpot