Cycle button issues

mezz · Post by **mezz** » Mon Aug 27, 2007 9:04 am

I'm not sure if this is a bug or feature, but I am having a problem with using cycles on the main page.
I want to have a few cycle buttons that would basically be 'autopilot mode' for a bunch of moving lights. As I have it, there are several switches activated in sequence with a 5min delay between switches that runs in a loop within the cycle. I have 3 or 4 cycle buttons (slow, med and fast looks)
I am unable to stop the cycle from running when I want.
-I cannot double click the cycle button to make it stop
-I can't seem to stop the cycle by activating a scene as it says in the manual.

I'm using pan/tilt shapes in easy-time for each switch. I like the fact that I can make a big loop of smaller loops, but making it stop is the big problem.

Post by **bruno.falip** » Tue Aug 28, 2007 8:13 am

Double-click on the 'INIT' scene

mezz · Post by **mezz** » Tue Aug 28, 2007 8:24 am

I tried that and it did nothing to the cycle.

Post by **bruno.falip** » Wed Aug 29, 2007 7:18 am

The option "the cycle can be stopped by calling a scene" must be selected in the button settings window.

mezz · Post by **mezz** » Wed Aug 29, 2007 4:39 pm

Yes, I have that set as well and still am unable to stop a cycle either by calling a scene or the init button. Is there anything else I am missing?

Post by **dylan** » Thu Aug 30, 2007 7:25 am

Send me your show to [email protected] and I try to help you ...