S3 - BPM Midi Trigger Bug

[EVOLVEINSTALL]

2 Midi Triggers

Button 1 = TAP BPM
Button 2 = Affect BPM Level - set to 0 (BPM WILL SHOW 1.0)

Tap Button 2 - Perfect, a stop.
Tap back onto Button 1 multiple times to gain Correct BPM = And the BPM will show the BPM level but will not activate..
Have to reset via BPM detection mode button - cannot give a MIDI Command to reset.

Also..

Adding multiple Button phasing to 1 Fader = it will ALWAYS TICK ' Select Corresponding button when receiving this command' = Means when you bring up the fader with 2 commands, it will struggle for almost a minute. Times this with 30 phasing commands and BOOM!

[EVOLVEINSTALL]

https://www.youtube.com/watch?v=jlhVT9K4nT8