Tu dois mettre la touche en toggle OFF
-Edit + touche
-7ieme Rotary sur la console tourner sens anti-horaire jusqua que tu vois t off
-N'oublie pas s tore ton setting apres
bouton flash sur bcf 2000
Moderators: nick, florent, dylan, Jean
-
VJ-CrashOverDrive
- Experienced Forumor
- Posts: 57
- Joined: Tue Oct 07, 2003 3:28 am
- Location: Alma, Québec, Canada
- Contact:
Re: bouton flash sur bcf 2000
Shoot to Lives !
-
AlainKebraRenard
- Posts: 3
- Joined: Wed Mar 10, 2010 11:23 pm
Re: bouton flash sur bcf 2000
Système Sunlite Suite avec BCF2000 et Touch Screen ELO 1515 , boitier 2048 ch St A et basic 512 ch.
-
AlainKebraRenard
- Posts: 3
- Joined: Wed Mar 10, 2010 11:23 pm
Re: bouton flash sur bcf 2000
et donc c'est plutot ça...
* Report this post
* Reply with quote
Re: behringer buttons
Postby N.Webber on Thu May 07, 2009 11:24 am
You need to edit the button's 'Toggle On/Off' parameter.
While pressing the Edit button, click on the related button.
This puts you into edit mode for that button.
Rotate encoder No. 6 until the display reads T - Off.
Click the Edit button to exit edit mode and then the Save button to save the change.
As simple as that...
P.S. It's all in the manual...
N.W.
* Report this post
* Reply with quote
Re: behringer buttons
Postby N.Webber on Thu May 07, 2009 11:24 am
You need to edit the button's 'Toggle On/Off' parameter.
While pressing the Edit button, click on the related button.
This puts you into edit mode for that button.
Rotate encoder No. 6 until the display reads T - Off.
Click the Edit button to exit edit mode and then the Save button to save the change.
As simple as that...
P.S. It's all in the manual...
N.W.
Système Sunlite Suite avec BCF2000 et Touch Screen ELO 1515 , boitier 2048 ch St A et basic 512 ch.