Need REAL slow scan movement...

Speak about discontinued products here such as Sunlite 2004, 2002, 2000, ESA 2007 and EasyView 2004.

Moderators: simonB, RichterMC, florent, dylan

teggers
Junior Forumor
Posts: 49
Joined: Tue Feb 08, 2005 2:02 am
Location: Orlando, Florida
Contact:

Need REAL slow scan movement...

Post by teggers »

I will do a search later tonight on this question, but I need to slow down the fade time REAL slow so the lights will scan the room with logos. I was using the automated settings but was unable to slow them down as much as I needed. I had to actually use a manual controler (and not use the software) and program that with a fade slider to get by.

How do I edit the "fade" of the pre-generated scenes/chases so the lights scan REAL slow?

Thanks, Tim Eggers
Guest

Post by Guest »

You must:

1- Edit the scene
2- Right-click on the shape area
3- Select "Shape properties..." from the menu
4- Go to the "Time" tab and select a longer time for the steps
teggers
Junior Forumor
Posts: 49
Joined: Tue Feb 08, 2005 2:02 am
Location: Orlando, Florida
Contact:

Post by teggers »

Thanks so much.....works like a charm....

I knew it was easy but with a show going on and all....forgot where that setting was.

BTW, can I alter the settings of all the time lines by multiple selection of the fixtures - or do I have to edit all of them - 1 at a time?
Post Reply