Hi all,
I have created a page for a Hazer, and I now want to change the DMX channels assigned to the Hazer. However, when I change the Sunlite Page settings to the new channels (change the channels and do a Patch reset), the buttons I have set up on that page loose their values. I believe the programmed switch setting stay on the original channels.
Is there a way to remap the buttons to the new DMX channels without having to re-program all the buttons?
Cheers, Vince
Remapping DMX channels for buttons in SL04
Moderators: simonB, RichterMC, florent, dylan
-
- Junior Forumor
- Posts: 49
- Joined: Tue Feb 08, 2005 2:02 am
- Location: Orlando, Florida
- Contact:
I had to remap my Joy 300's (Elation) for and extra channel (16 each) so they would line up with my Console in the case of a Windows crash and subsequent console back up.
Now they come up on channels 1, 17, 33, 49, 65, etc....instead of 1, 16, 31, 46, 61...! That way, I can have the lights addressed so I can switch the computer control to the console/board out in about 10 seconds if I have toooooooo.
Took about 5 minutes by hand, but works like a charm. Saved it and never have to do it again....
Now they come up on channels 1, 17, 33, 49, 65, etc....instead of 1, 16, 31, 46, 61...! That way, I can have the lights addressed so I can switch the computer control to the console/board out in about 10 seconds if I have toooooooo.
Took about 5 minutes by hand, but works like a charm. Saved it and never have to do it again....