Hello!
I am trying to change the color of 2 fixtures from 4.
I change in the fixure-view, and do this:
1) disable "disable to return"
2) select "live"
3) select my 2 fixtures and select color. -->> works fine
4) select my other 2 fixtures and select color -->> the color of ALL fixtures (4) changes!!
How can I have f.ex. 2 blue and 2 red lights??
Thanks!
Leo
groups?
Moderators: simonB, RichterMC, florent, dylan
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Re: groups?
Do not forget to unselect the 2 first fixtures before changing their color.
Cordialement/Best regards
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Re: groups?
And don't forget to select live again after you selected first 2 units.
So it goes like this:
1. select live
2. select 2 units
3.select color fot those 2 unit
4. selest live
5.unselect previuos 2 units and select others.
6.select color or any other function to others.
So it goes like this:
1. select live
2. select 2 units
3.select color fot those 2 unit
4. selest live
5.unselect previuos 2 units and select others.
6.select color or any other function to others.
Re: groups?
I tested it but it doesn't work!
1. select live
2. select 2 units
3.select color fot those 2 unit
4. selest live
5.unselect previuos 2 units and select others.
6.select color or any other function to others.
-->> All units change color! and not only the selected ones. How it is possible?
Can somebody test it, if I send him the file?
Thanks!
Leo
1. select live
2. select 2 units
3.select color fot those 2 unit
4. selest live
5.unselect previuos 2 units and select others.
6.select color or any other function to others.
-->> All units change color! and not only the selected ones. How it is possible?
Can somebody test it, if I send him the file?
Thanks!
Leo
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Re: groups?
Are you talking about the main screen or the editor screen?
Cordialement/Best regards
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Re: groups?
I'm talking about the 3D visualizer.
I think the problem is, the color is controlled by ONE RGB-boutton. And the same boutton (but with a different value/color) can't be confirmt for different gruops...
Can you help me?
Thanks,
Leo
I think the problem is, the color is controlled by ONE RGB-boutton. And the same boutton (but with a different value/color) can't be confirmt for different gruops...
Can you help me?
Thanks,
Leo
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Re: groups?
Of course you must add a second switch.
Cordialement/Best regards
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Re: groups?
I have to add a switch for each single color?
There's no possibility for giving a color from the RGB-bouton to a single group?
What is the best way to do that?
Thanks!
There's no possibility for giving a color from the RGB-bouton to a single group?
What is the best way to do that?
Thanks!
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Re: groups?
It is not possible for RGB o CMY color mixing: one switch = one color
Cordialement/Best regards
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com