BCf2000 and dmx in
Moderators: simonB, RichterMC, florent, dylan
BCf2000 and dmx in
I want to connect BCF2000 and external dmx console, but don't no how? When I set dmx512 in console window, BCF2000 stop working.
Re: BCf2000 and dmx in
It is only possible to have one 1 MIDI console loaded at a time in Suite 1 (this has changed in suite 2). The best way to achieve both DMX and MIDI control simultaneously would be:
1. Open the behringer console file within the console editor
2. Add some extra faders for DMX
3. Load your new console file in Suite 1
4. Right click one of your new faders and assign a DMX input by selecting a DMX universe and channel on the right
Alternatively if you just want to assign some DMX input channels directly to some output channels you could create a new switch and use the DMX rack within the button editor. Then you could set the switch to be "always on" within the switch properties.
1. Open the behringer console file within the console editor
2. Add some extra faders for DMX
3. Load your new console file in Suite 1
4. Right click one of your new faders and assign a DMX input by selecting a DMX universe and channel on the right
Alternatively if you just want to assign some DMX input channels directly to some output channels you could create a new switch and use the DMX rack within the button editor. Then you could set the switch to be "always on" within the switch properties.