Hi
I removed the SD while the stick was running. I put it back but ow nothing is working. I tried the hardware config tool and the firmware update failed... What can I do?
remove SD while stick running
Moderators: simonB, nick, florent, dylan, Ben
Re: remove SD while stick running
-Disconnect/reconnect the power
-Download the latest ESAPro
-Connect the STICK and update the firmware
If the STICK is not detected, your miniSD card is corrupt. Put it into the SD card socket on a computer and format it
-Download the latest ESAPro
-Connect the STICK and update the firmware
If the STICK is not detected, your miniSD card is corrupt. Put it into the SD card socket on a computer and format it
Simon
--
Sales/Support
--
Sales/Support