HELLO,
stick is freezing when I'm using rs232, i've noticed it only happens when i'm selecting scenes too fast.
the current scene keeps playing, but i no longer have control of the device and have to reboot it.
STICK IS FREEZING
Moderators: simonB, nick, florent, dylan, Ben
Re: STICK IS FREEZING
Hello
A few things to try:
-Try writing a very simple show with 8 static scenes on page 8. Does the unit still freeze?
-Does the unit freeze when you quickly trigger scenes over ethernet using the mobile apps?
-Try connecting it to a computer and using LookRS232. We have a short video here:
http://www.nicolaudie.com/downloads/fil ... /rs232.wmv
-Are you using the KU1 or the KE1?
Let me know how you get on
A few things to try:
-Try writing a very simple show with 8 static scenes on page 8. Does the unit still freeze?
-Does the unit freeze when you quickly trigger scenes over ethernet using the mobile apps?
-Try connecting it to a computer and using LookRS232. We have a short video here:
http://www.nicolaudie.com/downloads/fil ... /rs232.wmv
-Are you using the KU1 or the KE1?
Let me know how you get on
Simon
--
Sales/Support
--
Sales/Support
Re: STICK IS FREEZING
Hello,
- I tried doing 8 simple scenes(all static colors) on page E, and is still freezing.
- I have not tried using the Ethernet. Where do i find wiring diagram?
- Also tried LookRS232 and it seems to work fine, the stick freezes when I'm controlling it with a Crestron Processor.
- I'm Using the KU-1
- Today when I came back i noticed that it was frozen again, even when no one had been using it, the stick was left playing one scene (static red)
not sure if this would make any difference but here's a picture of the back of the stick:
also a picture of my code :
- I tried doing 8 simple scenes(all static colors) on page E, and is still freezing.
- I have not tried using the Ethernet. Where do i find wiring diagram?
- Also tried LookRS232 and it seems to work fine, the stick freezes when I'm controlling it with a Crestron Processor.
- I'm Using the KU-1
- Today when I came back i noticed that it was frozen again, even when no one had been using it, the stick was left playing one scene (static red)
not sure if this would make any difference but here's a picture of the back of the stick:
also a picture of my code :
Re: STICK IS FREEZING
Hello
This is quite hard for us to test without knowing the commands coming from the Crestron system. Would you be able to find out the kind of commands which crash the STICK and record them? This would make it much easier for us to find the problem
This is quite hard for us to test without knowing the commands coming from the Crestron system. Would you be able to find out the kind of commands which crash the STICK and record them? This would make it much easier for us to find the problem
Simon
--
Sales/Support
--
Sales/Support