Hey guys, I have installed a stick in a showroom that displays Christmas decorations. It is hooked upto a wireless router and everything is working beautifully, including the remote App... Now I have tried to add to the system a big red button to activate the "all on scene", Ive connected the button to one of the dry contact ports and I assigned the port to the scene and saved it to the stick. But my big red button isn't working.
Any help or advice on something that I may have missed would be greatly appreciated.
Triggering scenes from a port?
Moderators: simonB, nick, florent, dylan, Ben
-
- Junior Forumor
- Posts: 16
- Joined: Mon Feb 20, 2012 8:44 pm
-
- Junior Forumor
- Posts: 16
- Joined: Mon Feb 20, 2012 8:44 pm
Re: Triggering scenes from a port?
Never mind! Heh. I'm getting good at sorting out my own issues here.
I found that I had to go into the tool box and select what I triggers I wanted to use. Once I had activated the ports. My big red button was a good to go.
Yet again I look like a fricken legend thanks to nicolaudie! Boooyah!
I found that I had to go into the tool box and select what I triggers I wanted to use. Once I had activated the ports. My big red button was a good to go.
Yet again I look like a fricken legend thanks to nicolaudie! Boooyah!