Hi Everyone
I am new to ESA and need help please.
I need to trigger 3 scenes by the time clock independently and the times will over lap
For example I start one scene at 9am and it runs for 5hours
Secone scene starts at 10am and runs for 4hours
Third scene starts at 11am runs for 6 hours.
I have the ESA program and the interface unit has the time clock
The interface unit controls 3 separate RGB DMX controllers for LED strip light.
Each RGB DMX controller has a separate DIP switch setting to operate independently
My first scene starts fine but then when the second scene starts it over rides what the
firts scene is doing
Any help would be great thanks
Thanks Tony
Time triggering 3 overlapping scenes
Moderators: simonB, RichterMC, florent, dylan
-
- SuperMaxi Forumor
- Posts: 723
- Joined: Mon Nov 06, 2006 5:12 pm
Re: Time triggering 3 overlapping scenes
I ti not possible to do that with the SLESA-U5 and U6 products, you will need a SLESA-U7 to trigger several scenes at the same time.
Cordialement/Best regards
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com
Bruno Falip
http://www.nicolaudie.com
http://www.lightingsoft.com
http://www.dmxsoft.com