Page 1 of 1
differences between Sunlite2 and Esa Pro
Posted: Sun Sep 11, 2011 1:05 pm
by gabrielefx
Dear Sirs,
I would like to know if with Sunlite2 I can do the same effects that I can create with Esa Pro.
Is possible to use SLESA-IP1 with Sunlite2 ?, if not, are you planning for a .net dmx interface compatible with Sunlite2 ?
Regards.
Re: differences between Sunlite2 and Esa Pro
Posted: Thu Sep 15, 2011 1:46 pm
by simonB
Hi
I would like to know if with Sunlite2 I can do the same effects that I can create with Esa Pro.
Yes, this is accomplished using EasyTime.
Is possible to use SLESA-IP1 with Sunlite2
Yes, there are 2 ways to do this..
1. Use the SUNNET protocol. This is done by connecting the ip1 and a Suite2-FC. Go to software preferences->output and select "Ethernet". Suite 2 will then search for all SLESA-IP or STICK interfaces.
2. Use the ARTNET protocol then use the SLESA-IP1 as an artnet-dmx converter. You only need a Suite 2 EC dongle to gain 2 universes for Art-Net, however your network must be on the 2.x.x.x network range. See the Multiple universes manual topic for more info:
http://www.nicolaudie.com/online_manual ... gY7dfP.htm