Problem Using Stick-GA2
Posted: Tue Apr 08, 2014 3:36 pm
Dear Nicolaudie Team,
i have problems using the GA2.
First i connect everything and open the Software. Everything was working.
Then i used the hardwaremanager to look for an actual Firmware. The hardwaremanager found a new firmware and installed it.
After that i have a lot of problems.
The display of the stick is flickering. The Firmware in the moment is the 0.92.
The biggest Problem is that the LED are start flashing when i klick on the DMX Option in the Hardwaremanager. When i klick on "off" everything is ok, when i klick on "DMX out" the Stripe starts flashing, no controll of the single Channels is possible.
Do you have a solving for this problem?
Thanks a lot, best regards,
LightTool
i have problems using the GA2.
First i connect everything and open the Software. Everything was working.
Then i used the hardwaremanager to look for an actual Firmware. The hardwaremanager found a new firmware and installed it.
After that i have a lot of problems.
The display of the stick is flickering. The Firmware in the moment is the 0.92.
The biggest Problem is that the LED are start flashing when i klick on the DMX Option in the Hardwaremanager. When i klick on "off" everything is ok, when i klick on "DMX out" the Stripe starts flashing, no controll of the single Channels is possible.
Do you have a solving for this problem?
Thanks a lot, best regards,
LightTool