Sunlite Forum

Hi all,

I have created a page for a Hazer, and I now want to change the DMX channels assigned to the Hazer. However, when I change the Sunlite Page settings to the new channels (change the channels and do a Patch reset), the buttons I have set up on that page loose their values. I believe the programmed switch setting stay on the original channels.

Is there a way to remap the buttons to the new DMX channels without having to re-program all the buttons?

Cheers, Vince

You are doing it right, change the channes, but do not click on patch reset, because this will bring you back to the original patch

I had to remap my Joy 300's (Elation) for and extra channel (16 each) so they would line up with my Console in the case of a Windows crash and subsequent console back up.

Now they come up on channels 1, 17, 33, 49, 65, etc....instead of 1, 16, 31, 46, 61...! That way, I can have the lights addressed so I can switch the computer control to the console/board out in about 10 seconds if I have toooooooo.

Took about 5 minutes by hand, but works like a charm. Saved it and never have to do it again....