Dear Sirs,
I would like to know if with Sunlite2 I can do the same effects that I can create with Esa Pro.
Is possible to use SLESA-IP1 with Sunlite2 ?, if not, are you planning for a .net dmx interface compatible with Sunlite2 ?
Regards.
differences between Sunlite2 and Esa Pro
Moderators: simonB, nick, RichterMC, florent, dylan, Ben
-
gabrielefx
- Junior Forumor
- Posts: 48
- Joined: Mon Sep 05, 2011 1:36 pm
Re: differences between Sunlite2 and Esa Pro
Hi
1. Use the SUNNET protocol. This is done by connecting the ip1 and a Suite2-FC. Go to software preferences->output and select "Ethernet". Suite 2 will then search for all SLESA-IP or STICK interfaces.
2. Use the ARTNET protocol then use the SLESA-IP1 as an artnet-dmx converter. You only need a Suite 2 EC dongle to gain 2 universes for Art-Net, however your network must be on the 2.x.x.x network range. See the Multiple universes manual topic for more info: http://www.nicolaudie.com/online_manual ... gY7dfP.htm
Yes, this is accomplished using EasyTime.I would like to know if with Sunlite2 I can do the same effects that I can create with Esa Pro.
Yes, there are 2 ways to do this..Is possible to use SLESA-IP1 with Sunlite2
1. Use the SUNNET protocol. This is done by connecting the ip1 and a Suite2-FC. Go to software preferences->output and select "Ethernet". Suite 2 will then search for all SLESA-IP or STICK interfaces.
2. Use the ARTNET protocol then use the SLESA-IP1 as an artnet-dmx converter. You only need a Suite 2 EC dongle to gain 2 universes for Art-Net, however your network must be on the 2.x.x.x network range. See the Multiple universes manual topic for more info: http://www.nicolaudie.com/online_manual ... gY7dfP.htm
Simon
--
Sales/Support
--
Sales/Support